CCS LED光源 PF Series 控制器

Light controller

CCS Multi-functional Control Units for High Power Strobe LED Light Units.
Brightness can be adjusted through output voltage control.
Parameter registration for individual inspections is possible.

加入追蹤

產品內容

Model name	PF-A4048-2 PF-A16048-4
Lighting method	Strobe lighting
Drive method	Constant-voltage system
Intensity control method	Variable-voltage control, Strobe time control
Number of channels	PF-A4048-2: 2 channels, PF-A16048-4: 4 channels
Number of output connectors	PF-A4048-2			L1: 2, L2: 1
Number of output connectors	PF-A16048-4			L1: 2, L2: 2, L3: 2, L4: 2
Applicable Light Unit (ratings)	High Power Strobe Light Units from CCS
Output voltage settings	Manual	Operation on the front panel			512 levels
Output voltage settings	External	Command input via TCP/IP or UDP/IP comm.	Signal input through parallel port		512 levels
Strobe time settings	Manual	Operation on the front panel			PF-A4048-2: 1 to 100 μs (in steps of 0.1 μs) PF-A16048-4: 1 to 500 μs*
Strobe time settings	External	Command input via TCP/IP or UDP/IP comm.	Signal input through parallel port
Lighting delay settings	Manual	Operation on the front panel			0 to 100 μs (in steps of 0.1 μs)
Lighting delay settings	External	Command input via TCP/IP or UDP/IP comm.	Signal input through parallel port		0 to 100 μs (in steps of 0.1 μs)
Input power	100 to 240 VAC (+10%, -15%), 50/60 Hz
Power consumption (typ.)	PF-A4048-2: 65 VA, PF-A16048-4: 140 VA
Inrush current (typ.)	PF-A4048-2: 15 A (at 100 VAC), 36 A (at 240 VAC) from a cold start
Inrush current (typ.)	PF-A16048-4: 17 A (at 100 VAC), 40.8 A (at 240 VAC) from a cold start
Ground leakage current	3.5 mA max. (264 VAC, 60 Hz, with no load)
Output voltage (ratings)	High intensity range: 33 to 48 VDC Low intensity range: 12 to 48 VDC
Output current (peak)	PF-A4048-2: 43.2 A total for 2 channels (21.6 A/connector), PF-A16048-4: 172.8 A total for 4 channels (21.6 A/connector)
Insulation withstand voltage (input-output, input-FG)	1500 VAC for one minute, Cutoff current: 10 mA, 500 VDC, 20 MΩ min.
Overvoltage category	Category II
Operating environment	Temperature: 0 to 40°C, Humidity: 20% to 85% (with no condensation) Altitude: 2,000 m max., Protective ground class: Class I, Pollution degree: 2, Indoor use only
Storage environment	Temperature: −20 to 60°C, Humidity: 20% to 85% (with no condensation)
Cooling method	Forced air cooling
CE marking	Safety standard: Conforms to EN 61010-1, EMC standard: Conforms to EN61000-6-2 and EN61000-6-4
Environmental regulations	RoHS compliant
Material, coating, and surface processing	Steel sheet, Cover thickness: 1.6 mm, Chassis thickness: 1.0 mm, Black (half matte)
Weight	PF-A4048-2: 1,900 g max., PF-A16048-4: 3,300 g max.
Accessories	Instruction guide, 2-m-long 3-prong AC power cord with ground terminal