CCS LED光源 POD Series 控制器

Light controller

Multi-functional and fine-tunable controller for various applications from CCS.
Strobe lighting.
Overdrive specifications.
Voltage control is allowed during the overdrive operation.

For more detailed information, please refer to the table below.

加入追蹤

產品內容

Model name	POD-5024-2-PEI, POD-22024-4-PEI
Lighting method	Strobe lighting (Overdrive mode), Continuous lighting (PWM mode)
Drive method	Constant-voltage system
Intensity control method	Variable-voltage control, PWM control
Number of channels	POD-5024-2-PEI: 2 channels, POD-22024-4-PEI: 4 channels
Output ratings	POD-5024-2-PEI		POD-22024-4-PEI
	When both channels are in O/D Mode	Output current: 10 A max. (total for 2 channels)	O/D Mode (peak)	Total for all channels: 50 A max. L1, L2: 15 A max./channel (SM connector: 10 A max.) L3, L4: 10 A max./channel
	When both channels are in PWM Mode	Output power: 45 W max. (total for 2 channels)	O/D Mode (peak)
	When both channels are in PWM Mode	Output power: 45 W max. (total for 2 channels)	PWM Mode	Total for all channels: 200 W max. L1, L2: 100 W max./channel (SM connector: 60W max.) L3, L4: 60 W max./channel
	When the channels are used together with different lighting modes	Output current: 6.3 A max. and Output power: 36 W max. (total for 2 channels)	PWM Mode
PWM frequency	125 kHz	125 kHz	125 kHz	125 kHz
Light control settings	Manual	Operation on the front panel		512 levels
Light control settings	External	Command input via TCP/IP or UDP/IP communications	Signal input through parallel port	512 levels
Strobe time settings	Manual	Operation on the front panel		POD-5024-2-PEI: 1 to 1,000 μs (in steps of 1 μs) POD-22024-4-PEI: 1 to 3,000 μs
Strobe time settings	External	Command input via TCP/IP or UDP/IP communications	Signal input through parallel port
Lighting delay settings	Manual	Operation on the front panel		0 to 1,000 μs (in steps of 1 μs)
Lighting delay settings	External	Command input via TCP/IP or UDP/IP communications	Signal input through parallel port	0 to 1,000 μs (in steps of 1 μs)
Input power	100 to 240 VAC (+10%, -15%), 50/60 Hz
Power consumption (typ.)	POD-5024-2-PEI: 65 VA, POD-22024-4-PEI: 260 VA
Inrush current (typ.)	POD-5024-2-PEI: 15 A (at 100 VAC), 36 A (at 240 VAC) from a cold start
Inrush current (typ.)	POD-22024-4-PEI: 17 A (at 100 VAC), 40.8 A (at 240 VAC) from a cold start
Ground leakage current	3.5 mA max. (264 VAC, 60 Hz, with no load)
Output voltage (ratings)	Overdrive (O/D) mode: 24 to 48 VDC PWM mode: 24 VDC
Insulation withstand voltage (input-output, input-FG)	1,500 VAC for one minute, Cutoff current: 10 mA, 500 VDC, 20 MΩ min.
Overvoltage category	Category II
Operating environment	Temperature: 0 to 40°C, Humidity: 20% to 85% (with no condensation) Altitude: 2,000 m max., Protective ground class: Class I, Pollution degree: 2, Indoor use only
Storage environment	Temperature: −20 to 60°C, Humidity: 20% to 85% (with no condensation)
Cooling method	Forced air cooling
CE marking	Safety standard: Conforms to EN 61010-1 EMC standard: Conforms to EN61000-6-2, EN61000-6-4
Environmental regulations	RoHS compliant
Material, coating, and surface processing	Steel sheet, Cover thickness: 1.6 mm, Chassis thickness: 1.0 mm, N3 (leather tone)
Weight	POD-5024-2-PEI: 1,500 g max., POD-22024-4-PEI: 3,300 g max.
Accessories	Instruction Guide x1, 2-m-long 3-prong AC power cord with ground terminal x1